For example, if an SPI slave has tied the slave select to an interrupt line and it sees the line is toggled without any bytes sent, it can interpret the action as a command to prepare its firmware for an subsequent reception of bytes. The lines are effectively pulled up to 3. Data can be shifted at very high rates in full duplex. Here is a simplified description of the protocol. If a line’s bit is 0 , the line is configured as an input. I 2 C slave read data is available.

Uploader: Zulkik
Date Added: 7 February 2010
File Size: 54.30 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 62857
Price: Free* [*Free Regsitration Required]

Recall that, like all other Aardvark functions, this function is not thread-safe. Attempting to use a feature that is not supported will result in an error.

If the topmost bit of addr is set, the slave will respond to a general call transmission by an I 2 C master. Request that the Philips combined format is followed during a I 2 C read operation. This function is recommended for use in complex applications where extended information is required.

The accuracy of this function depends on the operating system scheduler. Set the I 2 C bitrate in kilohertz. If data is already in one or more asynchronous queues, it will immediately return with all of the types of asynchronous data that are currently available.


A virtually unlimited number of configurations is possible to help engineers develop and test their embedded systems. Note that the last few bytes of the response may be corrupted as well.

USB Drivers – Linux v – Total Phase

If the Aardvark adapter is connected to an I 2 C bus that also includes pull-up resistors, the total pull-up current could be potentially larger. I 2 C has many features other important features worth aaardvark.

While provided language bindings stubs are fully functional, it is possible to modify the code found within this file according to specific requirements imposed by the application designer.

JavaScript seems to be disabled in your browser.

Aardvark Software API

USB Drivers – Windows. The requested slave is on the bus but refuses to acknowledge its address. Read a stream of bytes from the I 2 C slave device. JavaScript seems to be disabled in your browser. Most of the Aardvark API functions can return a status ussb error code back to the caller.

By saving just a few hours of engineering time, the Aardvark adapter will have paid for itself. The next time the line is an output and activated for GPIO, the output value previously set will automatically take effect. Here, the arbitration was aardvsrk during the slave addressing phase results can be unpredictable.

The following steps can help setup the correct permissions.


Available Software Downloads

The ribbon cable is a standard wire 0. Therefore, drawing large amounts of current from the host is not advisable. Hence, there could be multiple responses queued up from previous write transactions. Write a stream of bytes to the I 2 C slave device followed by a read from the same slave device. This concept is explained below. The status code allows the user to discover specific events on the I 2 C bus that would otherwise be transparent given only the number of bytes transacted.

First, choose the Rosetta bindings appropriate for the programming language. SPI is a bit-blasting scheme where the master does not even know if there is a slave aardvrak the other end of the transmission. Since only two wires are required, I 2 C is well suited for boards with many devices connected on the bus.

A slave can receive messages asynchronously with respect to the host PC software. If an Aardvark adapter is subsequently removed from the system, the remaining adapters shift their port numbers accordingly. Distribution rights do not include public posting or mirroring on Internet websites.